Hospital Beds

Model # BD-020 Bed with Baby Crib

BED FOR WARD:  Laying area size 183cm x  91.5cm, made from 1 mm M.S. sheet and rectangular pipe, Epoxy powder coated finish, head and foot bows are detachable type and made of square tube size 38mm x 1.2mm wall thickness tube with three pipe ribs.

Model # BD-021  Plain Ward Bed

BED FOR WARD:  size 183cm x  91.5cm mattress platform,  made from 1 mm M.S. sheet, Epoxy powder coated finish, head and foot bows are bolted and made of tube size 32mm x 1.2mm wall thickness tube with three pipe ribs.

Model # BD-054  Ward / Attendant Bed

BED FOR ATTENDANT  size 183cm x  91.5cm or 183cm x 63cm mattress platform  made from angle iron 38mm x 38mm x 5mm, with wood baton top or M.S. Sheet top.

Model #: BD-37W5 Three Crank Bed

All laminated board finish. Fixed head and foot ends with window to operate cranks.

Have provision to fix safety side grills, and I. V. Pole at all four corners.

Model #: BD-3695B Three Crank Gatch Bed

Detachable head and foot bows. Have provision to fix safety side grills.

Have provision to fix I. V. Pole at all four corners. Roller buffers at all corners.

Monkey Bar, and Orthopedic attachments available.

Model #: BD-2795 Two Crank Gatch Bed

Two crank function. Detachable head and foot bows. Have provision to fix safety side grills.

Provision for I. V. Pole at all four corners. Roller buffers at all corners.

Monkey Bar, and Orthopedic attachments.

Removable head, foot and side grill

Model #: BD-21T75B Two Crank Gatch Bed Tilt Top

Two crank to raise head and foot portion. Roller bumper at corners.

Tilt top can attain five different  positions. Wheel 5” dia. falls haw two with brakes.

All Epoxy powder coated rust and scratch resistant baked finish.

Model #: BD-1175 Single Crank Gatch Bed (detachable head-foot ends)

Laying area made of flat tube for size 78” x 36” x 20” ht from floor.

Roller buffers at corners. Provision to install I.V. Pole and side safety grills.

Detachable head and foot end with panel style No.7.

Model #: BD-111 Single Crank Bed

Fixed head and foot end of 1.25” x 18g with pipe ribs or laminated board. Laying area 6.5’ x 3’ x 20” ht from floor, ribbed with rectangular pipe. One crank to raise head portion only.

Wheel 3 “ dia optional. All Epoxy powder coated rust and scratch resistant baked finish.

Model #: BD-X11 Bed Backrest Adjustable

Fixed head and foot end of 1.25” x 18g with pipe ribs or laminated board.

Laying area 6.5’ x 3’ x 20” ht from floor, ribbed with rectangular pipe.

Manually raised head portion with clutch type lock.